🕷️ Crawler Inspector

URL Lookup

Direct Parameter Lookup

Raw Queries and Responses

1. Shard Calculation

Query:

Response:

Calculated Shard: 33 (from laksa057)

2. Crawled Status Check

Query:

curl -X POST \
  'http://laksa033.int.ahrefs:8124/' \
  -H 'Content-Type: text/plain' \
  -H 'X-ClickHouse-Database: crawler3' \
  -H 'Authorization: Basic YXBpOg==' \
  -d 'SELECT getAhrefsURLFromUnparsed(src_unparsed) AS found_url, ifNull(toUnixTimestamp(download_stamp), 0) AS crawl_time, ifNull(toUnixTimestamp(props_url_first_seen), 0) AS first_indexed_time, download_http_code AS http_code, src_unparsed AS src_unparsed, src_root_hash AS src_root_hash, history_drop_reason AS history_drop_reason, meta_title AS meta_title, meta_descriptions AS meta_descriptions, attrs_boilerpipe_text AS attrs_boilerpipe_text, attrs_markdown AS attrs_markdown, attrs_readable_markdown AS attrs_readable_markdown, meta_canonical AS meta_canonical FROM crawler3.page_info_local FINAL PREWHERE (src_root_hash, src_unparsed) IN ((getAhrefsRootHashFromUnparsed(getAhrefsUnparsedNoserviceFromURL(\'https://compasscs.com.au/minimum-lot-size/\')), getAhrefsUnparsedNoserviceFromURL(\'https://compasscs.com.au/minimum-lot-size/\'))) FORMAT JSONEachRow'

Response:

{"found_url":"https:\/\/compasscs.com.au\/minimum-lot-size\/","crawl_time":1770801901,"first_indexed_time":1633516476,"http_code":200,"src_unparsed":"au,com,compasscs!\/minimum-lot-size\/ s443","src_root_hash":"16257996993210974433","history_drop_reason":null,"meta_title":"Minimum Lot Size - Compass Consulting Surveyors","meta_descriptions":["Typical Mimimun Lot Size mapping What is a Minimum Lot Size and how does it affect dealings with land? Under the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which"],"attrs_boilerpipe_text":"What is a Minimum Lot Size and how does it affect dealings with land?\nUnder the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which is then cross-referenced with the written Instrument. The written instrument sets out the objectives of each zone, development which is permitted with or without consent and development which is prohibited.\nAnother set of maps shows the prescribed Minimum Lot Size for the entire LGA. Represented by varying colours on the map, the prescribed Minimum Lot Size for land indicates the minimum size for a newly created lot – with a few exceptions. But, what does it mean?\nThere are two factors to consider with the MLS and how it may affect any proposed development on the land: Firstly whether the lot is an existing lot or a newly created lot and how the size of the existing lot relates to the MLS. Secondly, whether the proposal is to create new lots, the size of any proposed lots and for what purpose they are created.\nConsidering an existing lot, with area in excess of the minimum lot size shown on the mapping, and in a Low Density Residential zone. Development permitted with consent in such a case includes construction and occupation of a dwelling on the land. If the lot does not meet the minimum lot size, no dwelling can be constructed on the lot. Furthermore, the land cannot be subdivided to create a lot of less than the minimum lot size.\nConsidering another case with an existing lot in a Rural (Primary Production) zone, with area less than the prescribed minimum lot size. Development permitted with consent, which may vary between LGA’s, usually includes primary industry related activities. Existing dwellings on the land are able to be occupied under Existing Use Rights – provided the occupation does not lapse for a period of 12 months or more (EP&A Act Clause 107 Sec (3)). If the land does not have a dwelling upon it, no new dwelling can be constructed.\nThe situation in rural zones is further complicated by Rural Subdivision clauses which have been adopted by some Councils. These clauses typically allow subdivision of land in rural areas, and may allow the creation of lots with area below the prescribed Minimum Lot Size, provided that no existing dwelling will be situated on a lot below the Minimum Lot Size after the subdivision, and that no dwelling could be constructed on a lot below the Minimum Lot Size.\nBoundaries between existing lots where one or more of the lots have area below the Minimum Lot Size can be changed by way of boundary adjustment. Where the change is “minor”, the development may be considered exempt development (not requiring a development application) under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Where the change is not “minor”, development consent is required by the local Council.\nProblems arise with the current system where the mapping is changed or created where existing lots are less than the Minimum Lot Size. This is particularly common in rural zones, where Minimum Lot Sizes reflect the size of agricultural holding which is considered adequate to be economically sustainable. This supposition that each lot is an independent agricultural holding does not reflect the historical system where most agricultural holdings are made up of multiple lots. The flexibility of this system allows farm adjustments to occur without subdivision. Under the current Minimum Lot Size system however, for a new dwelling to be constructed the lot must meet the Minimum Lot Size criteria. Subdivision of land can still occur if the LEP contains a clause allowing rural subdivision, as outlined above.\nIn other zones, particularly residential zones, when existing lots are less than the Minimum Lot Size, there are limited clauses to allow subdivision other than minor realignments of a boundary under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Subdivision of land is permissible only when the lot or lots being created are in excess of the Minimum Lot Size. This restriction prevents adjustments of boundaries which are larger than “minor” where lots do not meet the Minimum Lot Size.\nTo remedy a restrictive Minimum Lot Size, the only path currently available is via a planning proposal – an expensive and slow process. Where the LEP is under review, a submission can be made to request that consideration be given to changing a Minimum Lot Size while retaining the current zoning. This option is sometimes preferred by Councils to an application which also changes the zone, because the permitted land uses and objectives of the zone are retained.\nThere are other mechanisms which may allow boundary adjustments or subdivisions where the proposed lots do not comply with the Minimum Lot Size, which vary between Councils. In some LGA’s, for example, other types of subdivision including Community title or Strata subdivision may be allowable to create lots of less than the prescribed Minimum Lot Size. Many councils will approve a subdivision to create lots of less than a prescribed Minimum Lot Size under other clauses of their LEP. If you wish to change boundaries and are restricted by the prescribed Minimum Lot Size, contact your local consulting surveyor or town planner for specific advice.\nEric Smith\nRegistered Surveyor","attrs_markdown":"[Skip to content](https:\/\/compasscs.com.au\/minimum-lot-size\/#content)\n\nCompass Consulting Surveyors - Direction in Development\n\n[Facebook](https:\/\/www.facebook.com\/CompassConsultingSurveyors)[Instagram](https:\/\/www.instagram.com\/compassconsultingsurveyors\/)[LinkedIn](https:\/\/www.linkedin.com\/company\/compass-consulting-surveyors\/)[Phone](<tel:02 6884 1008>)[Email](mailto:ccs@compasscs.com.au)\n\n[![Compass Consulting Surveyors Logo](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Compass-Consulting-Logo.png)](https:\/\/compasscs.com.au\/)\n\n- [**HOME**](https:\/\/compasscs.com.au\/)\n- [**WHO WE ARE**](https:\/\/compasscs.com.au\/who-we-are\/)\n- [**WHAT WE DO**](https:\/\/compasscs.com.au\/what-we-do\/)\n  - [**Subdivision and Easements**](https:\/\/compasscs.com.au\/what-we-do\/subdivision-and-easements\/)\n  - [**Mark Boundaries & Fencing Surveys**](https:\/\/compasscs.com.au\/what-we-do\/mark-boundaries-and-fencing-surveys\/)\n  - [**Identification Surveys**](https:\/\/compasscs.com.au\/what-we-do\/identification-surveys\/)\n  - [**Detail and Contour Surveys**](https:\/\/compasscs.com.au\/what-we-do\/detail-surveys-and-civil-design\/)\n  - [**Town Planning**](https:\/\/compasscs.com.au\/what-we-do\/town-planning\/)\n  - [**Subdivison Civil Design**](https:\/\/compasscs.com.au\/what-we-do\/subdivison-civil-design\/)\n  - [**Telecommunications Tower Sites**](https:\/\/compasscs.com.au\/what-we-do\/telecommunications-tower-sites\/)\n  - [**Engineering \/ Construction Setout**](https:\/\/compasscs.com.au\/what-we-do\/engineering-construction-setout\/)\n  - [**Drone\/UAV**](https:\/\/compasscs.com.au\/what-we-do\/drone-uav\/)\n  - [**Monitoring Wells**](https:\/\/compasscs.com.au\/what-we-do\/monitoring-well-location\/)\n  - [**PCA (BOMA) Surveys & Data Capture**](https:\/\/compasscs.com.au\/what-we-do\/pca-boma-surveys-data-capture\/)\n  - [**Weird and Wonderful**](https:\/\/compasscs.com.au\/what-we-do\/weird-and-wonderful\/)\n- [**PROJECTS**](https:\/\/compasscs.com.au\/projects\/)\n- [**BLOG POSTS**](https:\/\/compasscs.com.au\/blog-posts\/)\n- [**CONTACT**](https:\/\/compasscs.com.au\/contact-us\/)\n\n- [**HOME**](https:\/\/compasscs.com.au\/)\n- [**WHO WE ARE**](https:\/\/compasscs.com.au\/who-we-are\/)\n- [**WHAT WE DO**](https:\/\/compasscs.com.au\/what-we-do\/)\n  - [**Subdivision and Easements**](https:\/\/compasscs.com.au\/what-we-do\/subdivision-and-easements\/)\n  - [**Mark Boundaries & Fencing Surveys**](https:\/\/compasscs.com.au\/what-we-do\/mark-boundaries-and-fencing-surveys\/)\n  - [**Identification Surveys**](https:\/\/compasscs.com.au\/what-we-do\/identification-surveys\/)\n  - [**Detail and Contour Surveys**](https:\/\/compasscs.com.au\/what-we-do\/detail-surveys-and-civil-design\/)\n  - [**Town Planning**](https:\/\/compasscs.com.au\/what-we-do\/town-planning\/)\n  - [**Subdivison Civil Design**](https:\/\/compasscs.com.au\/what-we-do\/subdivison-civil-design\/)\n  - [**Telecommunications Tower Sites**](https:\/\/compasscs.com.au\/what-we-do\/telecommunications-tower-sites\/)\n  - [**Engineering \/ Construction Setout**](https:\/\/compasscs.com.au\/what-we-do\/engineering-construction-setout\/)\n  - [**Drone\/UAV**](https:\/\/compasscs.com.au\/what-we-do\/drone-uav\/)\n  - [**Monitoring Wells**](https:\/\/compasscs.com.au\/what-we-do\/monitoring-well-location\/)\n  - [**PCA (BOMA) Surveys & Data Capture**](https:\/\/compasscs.com.au\/what-we-do\/pca-boma-surveys-data-capture\/)\n  - [**Weird and Wonderful**](https:\/\/compasscs.com.au\/what-we-do\/weird-and-wonderful\/)\n- [**PROJECTS**](https:\/\/compasscs.com.au\/projects\/)\n- [**BLOG POSTS**](https:\/\/compasscs.com.au\/blog-posts\/)\n- [**CONTACT**](https:\/\/compasscs.com.au\/contact-us\/)\n\n- [**HOME**](https:\/\/compasscs.com.au\/)\n- [**WHO WE ARE**](https:\/\/compasscs.com.au\/who-we-are\/)\n- [**WHAT WE DO**](https:\/\/compasscs.com.au\/what-we-do\/)\n  - [**Subdivision and Easements**](https:\/\/compasscs.com.au\/what-we-do\/subdivision-and-easements\/)\n  - [**Mark Boundaries & Fencing Surveys**](https:\/\/compasscs.com.au\/what-we-do\/mark-boundaries-and-fencing-surveys\/)\n  - [**Identification Surveys**](https:\/\/compasscs.com.au\/what-we-do\/identification-surveys\/)\n  - [**Detail and Contour Surveys**](https:\/\/compasscs.com.au\/what-we-do\/detail-surveys-and-civil-design\/)\n  - [**Town Planning**](https:\/\/compasscs.com.au\/what-we-do\/town-planning\/)\n  - [**Subdivison Civil Design**](https:\/\/compasscs.com.au\/what-we-do\/subdivison-civil-design\/)\n  - [**Telecommunications Tower Sites**](https:\/\/compasscs.com.au\/what-we-do\/telecommunications-tower-sites\/)\n  - [**Engineering \/ Construction Setout**](https:\/\/compasscs.com.au\/what-we-do\/engineering-construction-setout\/)\n  - [**Drone\/UAV**](https:\/\/compasscs.com.au\/what-we-do\/drone-uav\/)\n  - [**Monitoring Wells**](https:\/\/compasscs.com.au\/what-we-do\/monitoring-well-location\/)\n  - [**PCA (BOMA) Surveys & Data Capture**](https:\/\/compasscs.com.au\/what-we-do\/pca-boma-surveys-data-capture\/)\n  - [**Weird and Wonderful**](https:\/\/compasscs.com.au\/what-we-do\/weird-and-wonderful\/)\n- [**PROJECTS**](https:\/\/compasscs.com.au\/projects\/)\n- [**BLOG POSTS**](https:\/\/compasscs.com.au\/blog-posts\/)\n- [**CONTACT**](https:\/\/compasscs.com.au\/contact-us\/)\n\n# Minimum Lot Size\n[Compass\\_Consulting](https:\/\/compasscs.com.au\/author\/compass_consulting\/ \"Posts by Compass_Consulting\")\n\n[![](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/MLS-Map-1024x574-1.jpg)](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/MLS-Map-1024x574-1.jpg \"MLS-Map-1024×574\")\n\nTypical Mimimun Lot Size mapping\n\n[![](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/MLS-Legend.jpg)](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/MLS-Legend.jpg \"MLS-Legend\")\n\nWhat is a Minimum Lot Size and how does it affect dealings with land?\n\nUnder the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which is then cross-referenced with the written Instrument. The written instrument sets out the objectives of each zone, development which is permitted with or without consent and development which is prohibited.\n\nAnother set of maps shows the prescribed Minimum Lot Size for the entire LGA. Represented by varying colours on the map, the prescribed Minimum Lot Size for land indicates the minimum size for a newly created lot – with a few exceptions. But, what does it mean?\n\nThere are two factors to consider with the MLS and how it may affect any proposed development on the land: Firstly whether the lot is an existing lot or a newly created lot and how the size of the existing lot relates to the MLS. Secondly, whether the proposal is to create new lots, the size of any proposed lots and for what purpose they are created.\n\nConsidering an existing lot, with area in excess of the minimum lot size shown on the mapping, and in a Low Density Residential zone. Development permitted with consent in such a case includes construction and occupation of a dwelling on the land. If the lot does not meet the minimum lot size, no dwelling can be constructed on the lot. Furthermore, the land cannot be subdivided to create a lot of less than the minimum lot size.\n\nConsidering another case with an existing lot in a Rural (Primary Production) zone, with area less than the prescribed minimum lot size. Development permitted with consent, which may vary between LGA’s, usually includes primary industry related activities. Existing dwellings on the land are able to be occupied under Existing Use Rights – provided the occupation does not lapse for a period of 12 months or more (EP\\&A Act Clause 107 Sec (3)). If the land does not have a dwelling upon it, no new dwelling can be constructed.\n\nThe situation in rural zones is further complicated by Rural Subdivision clauses which have been adopted by some Councils. These clauses typically allow subdivision of land in rural areas, and may allow the creation of lots with area below the prescribed Minimum Lot Size, provided that no existing dwelling will be situated on a lot below the Minimum Lot Size after the subdivision, and that no dwelling could be constructed on a lot below the Minimum Lot Size.\n\nBoundaries between existing lots where one or more of the lots have area below the Minimum Lot Size can be changed by way of boundary adjustment. Where the change is “minor”, the development may be considered exempt development (not requiring a development application) under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Where the change is not “minor”, development consent is required by the local Council.\n\nProblems arise with the current system where the mapping is changed or created where existing lots are less than the Minimum Lot Size. This is particularly common in rural zones, where Minimum Lot Sizes reflect the size of agricultural holding which is considered adequate to be economically sustainable. This supposition that each lot is an independent agricultural holding does not reflect the historical system where most agricultural holdings are made up of multiple lots. The flexibility of this system allows farm adjustments to occur without subdivision. Under the current Minimum Lot Size system however, for a new dwelling to be constructed the lot must meet the Minimum Lot Size criteria. Subdivision of land can still occur if the LEP contains a clause allowing rural subdivision, as outlined above.\n\nIn other zones, particularly residential zones, when existing lots are less than the Minimum Lot Size, there are limited clauses to allow subdivision other than minor realignments of a boundary under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Subdivision of land is permissible only when the lot or lots being created are in excess of the Minimum Lot Size. This restriction prevents adjustments of boundaries which are larger than “minor” where lots do not meet the Minimum Lot Size.\n\nTo remedy a restrictive Minimum Lot Size, the only path currently available is via a planning proposal – an expensive and slow process. Where the LEP is under review, a submission can be made to request that consideration be given to changing a Minimum Lot Size while retaining the current zoning. This option is sometimes preferred by Councils to an application which also changes the zone, because the permitted land uses and objectives of the zone are retained.\n\nThere are other mechanisms which may allow boundary adjustments or subdivisions where the proposed lots do not comply with the Minimum Lot Size, which vary between Councils. In some LGA’s, for example, other types of subdivision including Community title or Strata subdivision may be allowable to create lots of less than the prescribed Minimum Lot Size. Many councils will approve a subdivision to create lots of less than a prescribed Minimum Lot Size under other clauses of their LEP. If you wish to change boundaries and are restricted by the prescribed Minimum Lot Size, contact your local consulting surveyor or town planner for specific advice.\n\nEric Smith\n\nRegistered Surveyor\n\n## Related Posts\n![A Surveyor’s Toolbelt and Beyond](https:\/\/compasscs.com.au\/wp-content\/uploads\/2022\/07\/Tools-with-toolbelt-scaled-e1659049194901-500x383.jpg)\n\n[A Surveyor’s Toolbelt and Beyond](https:\/\/compasscs.com.au\/a-surveyors-toolbelt-and-beyond\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2022\/07\/Tools-with-toolbelt-scaled-e1659049194901.jpg)\n#### [A Surveyor’s Toolbelt and Beyond](https:\/\/compasscs.com.au\/a-surveyors-toolbelt-and-beyond\/ \"A Surveyor’s Toolbelt and Beyond\")\nAugust 1st, 2022 \\| [0 Comments](https:\/\/compasscs.com.au\/a-surveyors-toolbelt-and-beyond\/#respond)\n\n![Plan of Delimitation](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/12\/Delimitation-500x383.jpg)\n\n[Plan of Delimitation](https:\/\/compasscs.com.au\/plan-of-delimitation\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/12\/Delimitation.jpg)\n#### [Plan of Delimitation](https:\/\/compasscs.com.au\/plan-of-delimitation\/ \"Plan of Delimitation\")\nDecember 6th, 2021 \\| [0 Comments](https:\/\/compasscs.com.au\/plan-of-delimitation\/#respond)\n\n![A Brief History of Surveying in NSW](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/historyofsurveying2-500x383.jpg)\n\n[A Brief History of Surveying in NSW](https:\/\/compasscs.com.au\/a-brief-history-of-surveying-in-nsw\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/historyofsurveying2.jpg)\n#### [A Brief History of Surveying in NSW](https:\/\/compasscs.com.au\/a-brief-history-of-surveying-in-nsw\/ \"A Brief History of Surveying in NSW\")\nDecember 13th, 2020\n\n![ANZAC Maps](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Hero-Image-for-Blogs-500x383.jpg)\n\n[ANZAC Maps](https:\/\/compasscs.com.au\/anzac-maps\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Hero-Image-for-Blogs.jpg)\n#### [ANZAC Maps](https:\/\/compasscs.com.au\/anzac-maps\/ \"ANZAC Maps\")\nDecember 12th, 2020\n\n![Asset Protection from Bushfires](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Asset-Protection-Zone-example-image-NSW-RFS-1-500x383.jpg)\n\n[Asset Protection from Bushfires](https:\/\/compasscs.com.au\/asset-protection-from-bushfires\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Asset-Protection-Zone-example-image-NSW-RFS-1.jpg)\n#### [Asset Protection from Bushfires](https:\/\/compasscs.com.au\/asset-protection-from-bushfires\/ \"Asset Protection from Bushfires\")\nDecember 11th, 2020\n\n![A Surveyor’s Toolbelt and Beyond](https:\/\/compasscs.com.au\/wp-content\/uploads\/2022\/07\/Tools-with-toolbelt-scaled-e1659049194901-500x383.jpg)\n\n[A Surveyor’s Toolbelt and Beyond](https:\/\/compasscs.com.au\/a-surveyors-toolbelt-and-beyond\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2022\/07\/Tools-with-toolbelt-scaled-e1659049194901.jpg)\n#### [A Surveyor’s Toolbelt and Beyond](https:\/\/compasscs.com.au\/a-surveyors-toolbelt-and-beyond\/ \"A Surveyor’s Toolbelt and Beyond\")\nAugust 1st, 2022 \\| [0 Comments](https:\/\/compasscs.com.au\/a-surveyors-toolbelt-and-beyond\/#respond)\n\n![Plan of Delimitation](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/12\/Delimitation-500x383.jpg)\n\n[Plan of Delimitation](https:\/\/compasscs.com.au\/plan-of-delimitation\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/12\/Delimitation.jpg)\n#### [Plan of Delimitation](https:\/\/compasscs.com.au\/plan-of-delimitation\/ \"Plan of Delimitation\")\nDecember 6th, 2021 \\| [0 Comments](https:\/\/compasscs.com.au\/plan-of-delimitation\/#respond)\n\n![A Brief History of Surveying in NSW](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/historyofsurveying2-500x383.jpg)\n\n[A Brief History of Surveying in NSW](https:\/\/compasscs.com.au\/a-brief-history-of-surveying-in-nsw\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/historyofsurveying2.jpg)\n#### [A Brief History of Surveying in NSW](https:\/\/compasscs.com.au\/a-brief-history-of-surveying-in-nsw\/ \"A Brief History of Surveying in NSW\")\nDecember 13th, 2020\n\n![ANZAC Maps](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Hero-Image-for-Blogs-500x383.jpg)\n\n[ANZAC Maps](https:\/\/compasscs.com.au\/anzac-maps\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Hero-Image-for-Blogs.jpg)\n#### [ANZAC Maps](https:\/\/compasscs.com.au\/anzac-maps\/ \"ANZAC Maps\")\nDecember 12th, 2020\n\n![Asset Protection from Bushfires](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Asset-Protection-Zone-example-image-NSW-RFS-1-500x383.jpg)\n\n[Asset Protection from Bushfires](https:\/\/compasscs.com.au\/asset-protection-from-bushfires\/)\n\n[Gallery](https:\/\/compasscs.com.au\/wp-content\/uploads\/2021\/07\/Asset-Protection-Zone-example-image-NSW-RFS-1.jpg)\n#### [Asset Protection from Bushfires](https:\/\/compasscs.com.au\/asset-protection-from-bushfires\/ \"Asset Protection from Bushfires\")\nDecember 11th, 2020\n\n#### Latest News & Projects\n- [Detail and Contour Survey – Tibooburra](https:\/\/compasscs.com.au\/detail-and-contour-survey-tibooburra\/)\n- [Rural Subdivision – Paytens Bridge](https:\/\/compasscs.com.au\/rural-subdivision-paytens-bridge\/)\n- [Orange – Sewer Treatment Plant Expansion Project](https:\/\/compasscs.com.au\/orange-sewer-treatment-plant-expansion-project\/)\n- [Wellington North Solar Farm](https:\/\/compasscs.com.au\/wellington-north-solar-farm\/)\n- [Wellington Footbridge](https:\/\/compasscs.com.au\/wellington-footbridge\/)\n- [Construction Setout – 68-70 Peisley Street, Orange](https:\/\/compasscs.com.au\/construction-setout-68-70-peisley-street-orange\/)\n- [POSI – Wild Dog Fence Extension Project](https:\/\/compasscs.com.au\/posi-wild-dog-fence-extension-project\/)\n- [Molong Community Centre & Library Development](https:\/\/compasscs.com.au\/molong-community-centre-library-development\/)\n#### Get Social\n\n[CONTACT](https:\/\/compasscs.com.au\/contact-us\/) OUR PROFESSIONAL STAFF TODAY 02 6884 1008\n\nCompass Consulting Surveyors acknowledge the Wiradjuri people as the Traditional Owners and Custodians of the land on which we live and work, and pay respect to Elders past, present and emerging.\n\nCopyright 2024 \\| [Compass Consulting Surveyors](https:\/\/compasscs.com.au\/) \\| Website by [Out West Online](https:\/\/www.outwestonline.com.au\/) \\| All Rights Reserved\n\n[Page load link](https:\/\/compasscs.com.au\/minimum-lot-size\/)\n\n[Go to Top](https:\/\/compasscs.com.au\/minimum-lot-size\/)","attrs_readable_markdown":"What is a Minimum Lot Size and how does it affect dealings with land?\n\nUnder the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which is then cross-referenced with the written Instrument. The written instrument sets out the objectives of each zone, development which is permitted with or without consent and development which is prohibited.\n\nAnother set of maps shows the prescribed Minimum Lot Size for the entire LGA. Represented by varying colours on the map, the prescribed Minimum Lot Size for land indicates the minimum size for a newly created lot – with a few exceptions. But, what does it mean?\n\nThere are two factors to consider with the MLS and how it may affect any proposed development on the land: Firstly whether the lot is an existing lot or a newly created lot and how the size of the existing lot relates to the MLS. Secondly, whether the proposal is to create new lots, the size of any proposed lots and for what purpose they are created.\n\nConsidering an existing lot, with area in excess of the minimum lot size shown on the mapping, and in a Low Density Residential zone. Development permitted with consent in such a case includes construction and occupation of a dwelling on the land. If the lot does not meet the minimum lot size, no dwelling can be constructed on the lot. Furthermore, the land cannot be subdivided to create a lot of less than the minimum lot size.\n\nConsidering another case with an existing lot in a Rural (Primary Production) zone, with area less than the prescribed minimum lot size. Development permitted with consent, which may vary between LGA’s, usually includes primary industry related activities. Existing dwellings on the land are able to be occupied under Existing Use Rights – provided the occupation does not lapse for a period of 12 months or more (EP\\&A Act Clause 107 Sec (3)). If the land does not have a dwelling upon it, no new dwelling can be constructed.\n\nThe situation in rural zones is further complicated by Rural Subdivision clauses which have been adopted by some Councils. These clauses typically allow subdivision of land in rural areas, and may allow the creation of lots with area below the prescribed Minimum Lot Size, provided that no existing dwelling will be situated on a lot below the Minimum Lot Size after the subdivision, and that no dwelling could be constructed on a lot below the Minimum Lot Size.\n\nBoundaries between existing lots where one or more of the lots have area below the Minimum Lot Size can be changed by way of boundary adjustment. Where the change is “minor”, the development may be considered exempt development (not requiring a development application) under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Where the change is not “minor”, development consent is required by the local Council.\n\nProblems arise with the current system where the mapping is changed or created where existing lots are less than the Minimum Lot Size. This is particularly common in rural zones, where Minimum Lot Sizes reflect the size of agricultural holding which is considered adequate to be economically sustainable. This supposition that each lot is an independent agricultural holding does not reflect the historical system where most agricultural holdings are made up of multiple lots. The flexibility of this system allows farm adjustments to occur without subdivision. Under the current Minimum Lot Size system however, for a new dwelling to be constructed the lot must meet the Minimum Lot Size criteria. Subdivision of land can still occur if the LEP contains a clause allowing rural subdivision, as outlined above.\n\nIn other zones, particularly residential zones, when existing lots are less than the Minimum Lot Size, there are limited clauses to allow subdivision other than minor realignments of a boundary under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Subdivision of land is permissible only when the lot or lots being created are in excess of the Minimum Lot Size. This restriction prevents adjustments of boundaries which are larger than “minor” where lots do not meet the Minimum Lot Size.\n\nTo remedy a restrictive Minimum Lot Size, the only path currently available is via a planning proposal – an expensive and slow process. Where the LEP is under review, a submission can be made to request that consideration be given to changing a Minimum Lot Size while retaining the current zoning. This option is sometimes preferred by Councils to an application which also changes the zone, because the permitted land uses and objectives of the zone are retained.\n\nThere are other mechanisms which may allow boundary adjustments or subdivisions where the proposed lots do not comply with the Minimum Lot Size, which vary between Councils. In some LGA’s, for example, other types of subdivision including Community title or Strata subdivision may be allowable to create lots of less than the prescribed Minimum Lot Size. Many councils will approve a subdivision to create lots of less than a prescribed Minimum Lot Size under other clauses of their LEP. If you wish to change boundaries and are restricted by the prescribed Minimum Lot Size, contact your local consulting surveyor or town planner for specific advice.\n\nEric Smith\n\nRegistered Surveyor","meta_canonical":null}

3. Robots.txt Check

Query:

Response:

4. Spam/Ban Check

Query:

Response:

5. Seen Status Check

ℹ️ Skipped - page is already crawled

📄

INDEXABLE

✅

CRAWLED

2 months ago

🤖

ROBOTS SERVER UNREACHABLE

Failed to connect to robots server: Operation timed out after 2002 milliseconds with 0 bytes received

Page Info Filters

Filter	Status	Condition	Details
HTTP status	PASS	`download_http_code = 200`	HTTP 200
Age cutoff	PASS	`download_stamp > now() - 6 MONTH`	2.3 months ago
History drop	PASS	`isNull(history_drop_reason)`	No drop reason
Spam/ban	PASS	`fh_dont_index != 1 AND ml_spam_score = 0`	ml_spam_score=0
Canonical	PASS	`meta_canonical IS NULL OR = '' OR = src_unparsed`	Not set

Page Details

Property	Value
URL	https://compasscs.com.au/minimum-lot-size/
Last Crawled	2026-02-11 09:25:01 (2 months ago)
First Indexed	2021-10-06 10:34:36 (4 years ago)
HTTP Status Code	200
Meta Title	Minimum Lot Size - Compass Consulting Surveyors
Meta Description	Typical Mimimun Lot Size mapping What is a Minimum Lot Size and how does it affect dealings with land? Under the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which
Meta Canonical	null
Boilerpipe Text	What is a Minimum Lot Size and how does it affect dealings with land? Under the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which is then cross-referenced with the written Instrument. The written instrument sets out the objectives of each zone, development which is permitted with or without consent and development which is prohibited. Another set of maps shows the prescribed Minimum Lot Size for the entire LGA. Represented by varying colours on the map, the prescribed Minimum Lot Size for land indicates the minimum size for a newly created lot – with a few exceptions. But, what does it mean? There are two factors to consider with the MLS and how it may affect any proposed development on the land: Firstly whether the lot is an existing lot or a newly created lot and how the size of the existing lot relates to the MLS. Secondly, whether the proposal is to create new lots, the size of any proposed lots and for what purpose they are created. Considering an existing lot, with area in excess of the minimum lot size shown on the mapping, and in a Low Density Residential zone. Development permitted with consent in such a case includes construction and occupation of a dwelling on the land. If the lot does not meet the minimum lot size, no dwelling can be constructed on the lot. Furthermore, the land cannot be subdivided to create a lot of less than the minimum lot size. Considering another case with an existing lot in a Rural (Primary Production) zone, with area less than the prescribed minimum lot size. Development permitted with consent, which may vary between LGA’s, usually includes primary industry related activities. Existing dwellings on the land are able to be occupied under Existing Use Rights – provided the occupation does not lapse for a period of 12 months or more (EP&A Act Clause 107 Sec (3)). If the land does not have a dwelling upon it, no new dwelling can be constructed. The situation in rural zones is further complicated by Rural Subdivision clauses which have been adopted by some Councils. These clauses typically allow subdivision of land in rural areas, and may allow the creation of lots with area below the prescribed Minimum Lot Size, provided that no existing dwelling will be situated on a lot below the Minimum Lot Size after the subdivision, and that no dwelling could be constructed on a lot below the Minimum Lot Size. Boundaries between existing lots where one or more of the lots have area below the Minimum Lot Size can be changed by way of boundary adjustment. Where the change is “minor”, the development may be considered exempt development (not requiring a development application) under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Where the change is not “minor”, development consent is required by the local Council. Problems arise with the current system where the mapping is changed or created where existing lots are less than the Minimum Lot Size. This is particularly common in rural zones, where Minimum Lot Sizes reflect the size of agricultural holding which is considered adequate to be economically sustainable. This supposition that each lot is an independent agricultural holding does not reflect the historical system where most agricultural holdings are made up of multiple lots. The flexibility of this system allows farm adjustments to occur without subdivision. Under the current Minimum Lot Size system however, for a new dwelling to be constructed the lot must meet the Minimum Lot Size criteria. Subdivision of land can still occur if the LEP contains a clause allowing rural subdivision, as outlined above. In other zones, particularly residential zones, when existing lots are less than the Minimum Lot Size, there are limited clauses to allow subdivision other than minor realignments of a boundary under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Subdivision of land is permissible only when the lot or lots being created are in excess of the Minimum Lot Size. This restriction prevents adjustments of boundaries which are larger than “minor” where lots do not meet the Minimum Lot Size. To remedy a restrictive Minimum Lot Size, the only path currently available is via a planning proposal – an expensive and slow process. Where the LEP is under review, a submission can be made to request that consideration be given to changing a Minimum Lot Size while retaining the current zoning. This option is sometimes preferred by Councils to an application which also changes the zone, because the permitted land uses and objectives of the zone are retained. There are other mechanisms which may allow boundary adjustments or subdivisions where the proposed lots do not comply with the Minimum Lot Size, which vary between Councils. In some LGA’s, for example, other types of subdivision including Community title or Strata subdivision may be allowable to create lots of less than the prescribed Minimum Lot Size. Many councils will approve a subdivision to create lots of less than a prescribed Minimum Lot Size under other clauses of their LEP. If you wish to change boundaries and are restricted by the prescribed Minimum Lot Size, contact your local consulting surveyor or town planner for specific advice. Eric Smith Registered Surveyor
Markdown	[Skip to content](https://compasscs.com.au/minimum-lot-size/#content) Compass Consulting Surveyors - Direction in Development [Facebook](https://www.facebook.com/CompassConsultingSurveyors)[Instagram](https://www.instagram.com/compassconsultingsurveyors/)[LinkedIn](https://www.linkedin.com/company/compass-consulting-surveyors/)[Phone](<tel:02 6884 1008>)[Email](mailto:ccs@compasscs.com.au) [![Compass Consulting Surveyors Logo](https://compasscs.com.au/wp-content/uploads/2021/07/Compass-Consulting-Logo.png)](https://compasscs.com.au/) - [HOME](https://compasscs.com.au/) - [WHO WE ARE](https://compasscs.com.au/who-we-are/) - [WHAT WE DO](https://compasscs.com.au/what-we-do/) - [Subdivision and Easements](https://compasscs.com.au/what-we-do/subdivision-and-easements/) - [Mark Boundaries & Fencing Surveys](https://compasscs.com.au/what-we-do/mark-boundaries-and-fencing-surveys/) - [Identification Surveys](https://compasscs.com.au/what-we-do/identification-surveys/) - [Detail and Contour Surveys](https://compasscs.com.au/what-we-do/detail-surveys-and-civil-design/) - [Town Planning](https://compasscs.com.au/what-we-do/town-planning/) - [Subdivison Civil Design](https://compasscs.com.au/what-we-do/subdivison-civil-design/) - [Telecommunications Tower Sites](https://compasscs.com.au/what-we-do/telecommunications-tower-sites/) - [Engineering / Construction Setout](https://compasscs.com.au/what-we-do/engineering-construction-setout/) - [Drone/UAV](https://compasscs.com.au/what-we-do/drone-uav/) - [Monitoring Wells](https://compasscs.com.au/what-we-do/monitoring-well-location/) - [PCA (BOMA) Surveys & Data Capture](https://compasscs.com.au/what-we-do/pca-boma-surveys-data-capture/) - [Weird and Wonderful](https://compasscs.com.au/what-we-do/weird-and-wonderful/) - [PROJECTS](https://compasscs.com.au/projects/) - [BLOG POSTS](https://compasscs.com.au/blog-posts/) - [CONTACT](https://compasscs.com.au/contact-us/) - [HOME](https://compasscs.com.au/) - [WHO WE ARE](https://compasscs.com.au/who-we-are/) - [WHAT WE DO](https://compasscs.com.au/what-we-do/) - [Subdivision and Easements](https://compasscs.com.au/what-we-do/subdivision-and-easements/) - [Mark Boundaries & Fencing Surveys](https://compasscs.com.au/what-we-do/mark-boundaries-and-fencing-surveys/) - [Identification Surveys](https://compasscs.com.au/what-we-do/identification-surveys/) - [Detail and Contour Surveys](https://compasscs.com.au/what-we-do/detail-surveys-and-civil-design/) - [Town Planning](https://compasscs.com.au/what-we-do/town-planning/) - [Subdivison Civil Design](https://compasscs.com.au/what-we-do/subdivison-civil-design/) - [Telecommunications Tower Sites](https://compasscs.com.au/what-we-do/telecommunications-tower-sites/) - [Engineering / Construction Setout](https://compasscs.com.au/what-we-do/engineering-construction-setout/) - [Drone/UAV](https://compasscs.com.au/what-we-do/drone-uav/) - [Monitoring Wells](https://compasscs.com.au/what-we-do/monitoring-well-location/) - [PCA (BOMA) Surveys & Data Capture](https://compasscs.com.au/what-we-do/pca-boma-surveys-data-capture/) - [Weird and Wonderful](https://compasscs.com.au/what-we-do/weird-and-wonderful/) - [PROJECTS](https://compasscs.com.au/projects/) - [BLOG POSTS](https://compasscs.com.au/blog-posts/) - [CONTACT](https://compasscs.com.au/contact-us/) - [HOME](https://compasscs.com.au/) - [WHO WE ARE](https://compasscs.com.au/who-we-are/) - [WHAT WE DO](https://compasscs.com.au/what-we-do/) - [Subdivision and Easements](https://compasscs.com.au/what-we-do/subdivision-and-easements/) - [Mark Boundaries & Fencing Surveys](https://compasscs.com.au/what-we-do/mark-boundaries-and-fencing-surveys/) - [Identification Surveys](https://compasscs.com.au/what-we-do/identification-surveys/) - [Detail and Contour Surveys](https://compasscs.com.au/what-we-do/detail-surveys-and-civil-design/) - [Town Planning](https://compasscs.com.au/what-we-do/town-planning/) - [Subdivison Civil Design](https://compasscs.com.au/what-we-do/subdivison-civil-design/) - [Telecommunications Tower Sites](https://compasscs.com.au/what-we-do/telecommunications-tower-sites/) - [Engineering / Construction Setout](https://compasscs.com.au/what-we-do/engineering-construction-setout/) - [Drone/UAV](https://compasscs.com.au/what-we-do/drone-uav/) - [Monitoring Wells](https://compasscs.com.au/what-we-do/monitoring-well-location/) - [PCA (BOMA) Surveys & Data Capture](https://compasscs.com.au/what-we-do/pca-boma-surveys-data-capture/) - [Weird and Wonderful](https://compasscs.com.au/what-we-do/weird-and-wonderful/) - [PROJECTS](https://compasscs.com.au/projects/) - [BLOG POSTS](https://compasscs.com.au/blog-posts/) - [CONTACT](https://compasscs.com.au/contact-us/) # Minimum Lot Size [Compass\_Consulting](https://compasscs.com.au/author/compass_consulting/ "Posts by Compass_Consulting") [![](https://compasscs.com.au/wp-content/uploads/2021/07/MLS-Map-1024x574-1.jpg)](https://compasscs.com.au/wp-content/uploads/2021/07/MLS-Map-1024x574-1.jpg "MLS-Map-1024×574") Typical Mimimun Lot Size mapping [![](https://compasscs.com.au/wp-content/uploads/2021/07/MLS-Legend.jpg)](https://compasscs.com.au/wp-content/uploads/2021/07/MLS-Legend.jpg "MLS-Legend") What is a Minimum Lot Size and how does it affect dealings with land? Under the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which is then cross-referenced with the written Instrument. The written instrument sets out the objectives of each zone, development which is permitted with or without consent and development which is prohibited. Another set of maps shows the prescribed Minimum Lot Size for the entire LGA. Represented by varying colours on the map, the prescribed Minimum Lot Size for land indicates the minimum size for a newly created lot – with a few exceptions. But, what does it mean? There are two factors to consider with the MLS and how it may affect any proposed development on the land: Firstly whether the lot is an existing lot or a newly created lot and how the size of the existing lot relates to the MLS. Secondly, whether the proposal is to create new lots, the size of any proposed lots and for what purpose they are created. Considering an existing lot, with area in excess of the minimum lot size shown on the mapping, and in a Low Density Residential zone. Development permitted with consent in such a case includes construction and occupation of a dwelling on the land. If the lot does not meet the minimum lot size, no dwelling can be constructed on the lot. Furthermore, the land cannot be subdivided to create a lot of less than the minimum lot size. Considering another case with an existing lot in a Rural (Primary Production) zone, with area less than the prescribed minimum lot size. Development permitted with consent, which may vary between LGA’s, usually includes primary industry related activities. Existing dwellings on the land are able to be occupied under Existing Use Rights – provided the occupation does not lapse for a period of 12 months or more (EP\&A Act Clause 107 Sec (3)). If the land does not have a dwelling upon it, no new dwelling can be constructed. The situation in rural zones is further complicated by Rural Subdivision clauses which have been adopted by some Councils. These clauses typically allow subdivision of land in rural areas, and may allow the creation of lots with area below the prescribed Minimum Lot Size, provided that no existing dwelling will be situated on a lot below the Minimum Lot Size after the subdivision, and that no dwelling could be constructed on a lot below the Minimum Lot Size. Boundaries between existing lots where one or more of the lots have area below the Minimum Lot Size can be changed by way of boundary adjustment. Where the change is “minor”, the development may be considered exempt development (not requiring a development application) under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Where the change is not “minor”, development consent is required by the local Council. Problems arise with the current system where the mapping is changed or created where existing lots are less than the Minimum Lot Size. This is particularly common in rural zones, where Minimum Lot Sizes reflect the size of agricultural holding which is considered adequate to be economically sustainable. This supposition that each lot is an independent agricultural holding does not reflect the historical system where most agricultural holdings are made up of multiple lots. The flexibility of this system allows farm adjustments to occur without subdivision. Under the current Minimum Lot Size system however, for a new dwelling to be constructed the lot must meet the Minimum Lot Size criteria. Subdivision of land can still occur if the LEP contains a clause allowing rural subdivision, as outlined above. In other zones, particularly residential zones, when existing lots are less than the Minimum Lot Size, there are limited clauses to allow subdivision other than minor realignments of a boundary under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Subdivision of land is permissible only when the lot or lots being created are in excess of the Minimum Lot Size. This restriction prevents adjustments of boundaries which are larger than “minor” where lots do not meet the Minimum Lot Size. To remedy a restrictive Minimum Lot Size, the only path currently available is via a planning proposal – an expensive and slow process. Where the LEP is under review, a submission can be made to request that consideration be given to changing a Minimum Lot Size while retaining the current zoning. This option is sometimes preferred by Councils to an application which also changes the zone, because the permitted land uses and objectives of the zone are retained. There are other mechanisms which may allow boundary adjustments or subdivisions where the proposed lots do not comply with the Minimum Lot Size, which vary between Councils. In some LGA’s, for example, other types of subdivision including Community title or Strata subdivision may be allowable to create lots of less than the prescribed Minimum Lot Size. Many councils will approve a subdivision to create lots of less than a prescribed Minimum Lot Size under other clauses of their LEP. If you wish to change boundaries and are restricted by the prescribed Minimum Lot Size, contact your local consulting surveyor or town planner for specific advice. Eric Smith Registered Surveyor ## Related Posts ![A Surveyor’s Toolbelt and Beyond](https://compasscs.com.au/wp-content/uploads/2022/07/Tools-with-toolbelt-scaled-e1659049194901-500x383.jpg) [A Surveyor’s Toolbelt and Beyond](https://compasscs.com.au/a-surveyors-toolbelt-and-beyond/) [Gallery](https://compasscs.com.au/wp-content/uploads/2022/07/Tools-with-toolbelt-scaled-e1659049194901.jpg) #### [A Surveyor’s Toolbelt and Beyond](https://compasscs.com.au/a-surveyors-toolbelt-and-beyond/ "A Surveyor’s Toolbelt and Beyond") August 1st, 2022 \\| [0 Comments](https://compasscs.com.au/a-surveyors-toolbelt-and-beyond/#respond) ![Plan of Delimitation](https://compasscs.com.au/wp-content/uploads/2021/12/Delimitation-500x383.jpg) [Plan of Delimitation](https://compasscs.com.au/plan-of-delimitation/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/12/Delimitation.jpg) #### [Plan of Delimitation](https://compasscs.com.au/plan-of-delimitation/ "Plan of Delimitation") December 6th, 2021 \\| [0 Comments](https://compasscs.com.au/plan-of-delimitation/#respond) ![A Brief History of Surveying in NSW](https://compasscs.com.au/wp-content/uploads/2021/07/historyofsurveying2-500x383.jpg) [A Brief History of Surveying in NSW](https://compasscs.com.au/a-brief-history-of-surveying-in-nsw/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/07/historyofsurveying2.jpg) #### [A Brief History of Surveying in NSW](https://compasscs.com.au/a-brief-history-of-surveying-in-nsw/ "A Brief History of Surveying in NSW") December 13th, 2020 ![ANZAC Maps](https://compasscs.com.au/wp-content/uploads/2021/07/Hero-Image-for-Blogs-500x383.jpg) [ANZAC Maps](https://compasscs.com.au/anzac-maps/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/07/Hero-Image-for-Blogs.jpg) #### [ANZAC Maps](https://compasscs.com.au/anzac-maps/ "ANZAC Maps") December 12th, 2020 ![Asset Protection from Bushfires](https://compasscs.com.au/wp-content/uploads/2021/07/Asset-Protection-Zone-example-image-NSW-RFS-1-500x383.jpg) [Asset Protection from Bushfires](https://compasscs.com.au/asset-protection-from-bushfires/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/07/Asset-Protection-Zone-example-image-NSW-RFS-1.jpg) #### [Asset Protection from Bushfires](https://compasscs.com.au/asset-protection-from-bushfires/ "Asset Protection from Bushfires") December 11th, 2020 ![A Surveyor’s Toolbelt and Beyond](https://compasscs.com.au/wp-content/uploads/2022/07/Tools-with-toolbelt-scaled-e1659049194901-500x383.jpg) [A Surveyor’s Toolbelt and Beyond](https://compasscs.com.au/a-surveyors-toolbelt-and-beyond/) [Gallery](https://compasscs.com.au/wp-content/uploads/2022/07/Tools-with-toolbelt-scaled-e1659049194901.jpg) #### [A Surveyor’s Toolbelt and Beyond](https://compasscs.com.au/a-surveyors-toolbelt-and-beyond/ "A Surveyor’s Toolbelt and Beyond") August 1st, 2022 \\| [0 Comments](https://compasscs.com.au/a-surveyors-toolbelt-and-beyond/#respond) ![Plan of Delimitation](https://compasscs.com.au/wp-content/uploads/2021/12/Delimitation-500x383.jpg) [Plan of Delimitation](https://compasscs.com.au/plan-of-delimitation/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/12/Delimitation.jpg) #### [Plan of Delimitation](https://compasscs.com.au/plan-of-delimitation/ "Plan of Delimitation") December 6th, 2021 \\| [0 Comments](https://compasscs.com.au/plan-of-delimitation/#respond) ![A Brief History of Surveying in NSW](https://compasscs.com.au/wp-content/uploads/2021/07/historyofsurveying2-500x383.jpg) [A Brief History of Surveying in NSW](https://compasscs.com.au/a-brief-history-of-surveying-in-nsw/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/07/historyofsurveying2.jpg) #### [A Brief History of Surveying in NSW](https://compasscs.com.au/a-brief-history-of-surveying-in-nsw/ "A Brief History of Surveying in NSW") December 13th, 2020 ![ANZAC Maps](https://compasscs.com.au/wp-content/uploads/2021/07/Hero-Image-for-Blogs-500x383.jpg) [ANZAC Maps](https://compasscs.com.au/anzac-maps/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/07/Hero-Image-for-Blogs.jpg) #### [ANZAC Maps](https://compasscs.com.au/anzac-maps/ "ANZAC Maps") December 12th, 2020 ![Asset Protection from Bushfires](https://compasscs.com.au/wp-content/uploads/2021/07/Asset-Protection-Zone-example-image-NSW-RFS-1-500x383.jpg) [Asset Protection from Bushfires](https://compasscs.com.au/asset-protection-from-bushfires/) [Gallery](https://compasscs.com.au/wp-content/uploads/2021/07/Asset-Protection-Zone-example-image-NSW-RFS-1.jpg) #### [Asset Protection from Bushfires](https://compasscs.com.au/asset-protection-from-bushfires/ "Asset Protection from Bushfires") December 11th, 2020 #### Latest News & Projects - [Detail and Contour Survey – Tibooburra](https://compasscs.com.au/detail-and-contour-survey-tibooburra/) - [Rural Subdivision – Paytens Bridge](https://compasscs.com.au/rural-subdivision-paytens-bridge/) - [Orange – Sewer Treatment Plant Expansion Project](https://compasscs.com.au/orange-sewer-treatment-plant-expansion-project/) - [Wellington North Solar Farm](https://compasscs.com.au/wellington-north-solar-farm/) - [Wellington Footbridge](https://compasscs.com.au/wellington-footbridge/) - [Construction Setout – 68-70 Peisley Street, Orange](https://compasscs.com.au/construction-setout-68-70-peisley-street-orange/) - [POSI – Wild Dog Fence Extension Project](https://compasscs.com.au/posi-wild-dog-fence-extension-project/) - [Molong Community Centre & Library Development](https://compasscs.com.au/molong-community-centre-library-development/) #### Get Social [CONTACT](https://compasscs.com.au/contact-us/) OUR PROFESSIONAL STAFF TODAY 02 6884 1008 Compass Consulting Surveyors acknowledge the Wiradjuri people as the Traditional Owners and Custodians of the land on which we live and work, and pay respect to Elders past, present and emerging. Copyright 2024 \\| [Compass Consulting Surveyors](https://compasscs.com.au/) \\| Website by [Out West Online](https://www.outwestonline.com.au/) \\| All Rights Reserved [Page load link](https://compasscs.com.au/minimum-lot-size/) [Go to Top](https://compasscs.com.au/minimum-lot-size/)
Readable Markdown	What is a Minimum Lot Size and how does it affect dealings with land? Under the current format for Local Environmental Plans, much of the relevant information on land is shown in maps. There is a set of maps showing the zoning for the entire Local Government Area, which is then cross-referenced with the written Instrument. The written instrument sets out the objectives of each zone, development which is permitted with or without consent and development which is prohibited. Another set of maps shows the prescribed Minimum Lot Size for the entire LGA. Represented by varying colours on the map, the prescribed Minimum Lot Size for land indicates the minimum size for a newly created lot – with a few exceptions. But, what does it mean? There are two factors to consider with the MLS and how it may affect any proposed development on the land: Firstly whether the lot is an existing lot or a newly created lot and how the size of the existing lot relates to the MLS. Secondly, whether the proposal is to create new lots, the size of any proposed lots and for what purpose they are created. Considering an existing lot, with area in excess of the minimum lot size shown on the mapping, and in a Low Density Residential zone. Development permitted with consent in such a case includes construction and occupation of a dwelling on the land. If the lot does not meet the minimum lot size, no dwelling can be constructed on the lot. Furthermore, the land cannot be subdivided to create a lot of less than the minimum lot size. Considering another case with an existing lot in a Rural (Primary Production) zone, with area less than the prescribed minimum lot size. Development permitted with consent, which may vary between LGA’s, usually includes primary industry related activities. Existing dwellings on the land are able to be occupied under Existing Use Rights – provided the occupation does not lapse for a period of 12 months or more (EP\&A Act Clause 107 Sec (3)). If the land does not have a dwelling upon it, no new dwelling can be constructed. The situation in rural zones is further complicated by Rural Subdivision clauses which have been adopted by some Councils. These clauses typically allow subdivision of land in rural areas, and may allow the creation of lots with area below the prescribed Minimum Lot Size, provided that no existing dwelling will be situated on a lot below the Minimum Lot Size after the subdivision, and that no dwelling could be constructed on a lot below the Minimum Lot Size. Boundaries between existing lots where one or more of the lots have area below the Minimum Lot Size can be changed by way of boundary adjustment. Where the change is “minor”, the development may be considered exempt development (not requiring a development application) under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Where the change is not “minor”, development consent is required by the local Council. Problems arise with the current system where the mapping is changed or created where existing lots are less than the Minimum Lot Size. This is particularly common in rural zones, where Minimum Lot Sizes reflect the size of agricultural holding which is considered adequate to be economically sustainable. This supposition that each lot is an independent agricultural holding does not reflect the historical system where most agricultural holdings are made up of multiple lots. The flexibility of this system allows farm adjustments to occur without subdivision. Under the current Minimum Lot Size system however, for a new dwelling to be constructed the lot must meet the Minimum Lot Size criteria. Subdivision of land can still occur if the LEP contains a clause allowing rural subdivision, as outlined above. In other zones, particularly residential zones, when existing lots are less than the Minimum Lot Size, there are limited clauses to allow subdivision other than minor realignments of a boundary under the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. Subdivision of land is permissible only when the lot or lots being created are in excess of the Minimum Lot Size. This restriction prevents adjustments of boundaries which are larger than “minor” where lots do not meet the Minimum Lot Size. To remedy a restrictive Minimum Lot Size, the only path currently available is via a planning proposal – an expensive and slow process. Where the LEP is under review, a submission can be made to request that consideration be given to changing a Minimum Lot Size while retaining the current zoning. This option is sometimes preferred by Councils to an application which also changes the zone, because the permitted land uses and objectives of the zone are retained. There are other mechanisms which may allow boundary adjustments or subdivisions where the proposed lots do not comply with the Minimum Lot Size, which vary between Councils. In some LGA’s, for example, other types of subdivision including Community title or Strata subdivision may be allowable to create lots of less than the prescribed Minimum Lot Size. Many councils will approve a subdivision to create lots of less than a prescribed Minimum Lot Size under other clauses of their LEP. If you wish to change boundaries and are restricted by the prescribed Minimum Lot Size, contact your local consulting surveyor or town planner for specific advice. Eric Smith Registered Surveyor
Shard	33 (laksa)
Root Hash	16257996993210974433
Unparsed URL	au,com,compasscs!/minimum-lot-size/ s443